Ball 5.8mm with hex cavity, for connection to molded composite ball joints. Set of four. 

Set of composite shims for mounting servos to mounting posts. Includes: 3x6x1mm (qty 4), 3x6x2mm (qty 4), 3x6x3mm (qty 4). 

Steel 8.4mm pivot balls hardened and ultra-precisely hand ground for very high durability and long life. Set of 2.  

Composite M10 adjusting nut for capturing pivot balls in front steering blocks and rear uprights. Lighter than standard nut, easier mounting and usability. Fine tuning for serious racers. Set of 4. 

Set of molded composite ball-bearing bushings – eccentric bushing for bulkheads, concentric and eccentric bushing for front steering block or rear upright. Eccentric bushings in steering blocks and rear uprights allow for roll center and caster adjustment.  

CNC-machined adjustable turnbuckles, 20mm length, made from tough HUDY Spring Steel™. Set of 2. 

Molded composite rear lower right suspension arm. 

Molded composite rear lower left suspension arm. 

Molded composite rear upper suspension arm. 

Molded composite 5.8mm ball joints for rear upper camber link. Set of 2 short + 2 long. 

Composite pivot balls for smoother suspension movement. Set of 2. 

Small, robust rear uprights feature two easily-adjustable upper roll center positions for traction adjustment. Features two body mounting adjustment positions for different body types. Incorporated shorter and longer pivot ball joints for optimum set-up adjustment. Concentric and eccentric bushings allow for roll center adjustment. The eccentric bushings also allow independent wheelbase adjustment.  

Wire springs for providing positive pressure on wheel locks. Set of 2. 

CNC-machined rear drive axle made from world-renowned HUDY Spring Steel™. Strategically machined for toughness and light weight without compromising strength. 

Rear wheel lock CNC-machined from tough Swiss 7076 T6 alu. Set of 2. 

M3x3 setscrew, hex drive. Set of 10 pieces. 

M3x6 setscrew, hex drive. Set of 10. 

M3x16 setscrew, hex drive. Set of 10 pieces.
 

M4x10 setscrew, hex drive. Set of 10. 

M3x8 button-head machine screw, hex drive. Set of 10 pieces. 

New high-speed ball-bearings manufactured specially for XRAY. ID x OD x thickness (mm) = 12 x 18 x 4. Set of 2. 

Flat washer. ID x OD x thickness = 12mm x 15mm x 0.1mm. Set of 10 pieces. 

Flat washer. ID x OD x thickness = 12mm x 15mm x 1.0mm. Set of 10. 

Polished chrome pin. Dia. x length = 3mm x 22mm. Set of 10.